LABBOX LBX MF12 MUFU-020-001 Manual Del Usuario página 5

While the machine is working, don't touch the device top, as well as observation
window and exhaust port to keep away from high-temperature burns.
Do not open the door when the temperature more than 500℃
Set the temp.50℃ under the Max. temp. for long experiments
Read the instruction book before operation.
Meter operation instruction
1.1 Basic display status
When powered on, the screen shows the basic display status, upper window displays real process value (PV)
while lower window displays the set value (SV). If the real value overruns measure range (thermocouple breaks
for example), upper window will display "orAL" and the highest and lowest values, at this time, the controller
will automatically stop controlling the output.
In the controller, there are various LED lights: OP1, AU1, AU2, RUN respectively stand for output, first alarm,
second alarm, and working condition.
1.2 Time program setting:
In basic display status, if the parameter lock "Loc" isn't locked, we can set setpoint (SV) by pressing
. Press key to decrease the value,
modify. Press until it shows "t1", then you can set time.
1.3 Working control
When the power is on, the controller is in stop status, you can press
shows "run" to start controller's working. Press
working.
key to increase the value, and
for 2 seconds until it shows "stop" to stop the controller's
5
key to move to the digit expected to
for 2 seconds until the below window
、
or