Vaporesso FORZ TX80 Manual De Instrucciones página 6

You can choose traditional VW (H, N, S), VV, VT, BP (bypass)
and SP (super player) modes in this section. When the coil
resistance is extremely low, the device will provide an option
to enter the SP (Super Player) mode automatically.
System setting includes brightness, flip screen, smart VW on/
off, Auto Eco on/off, default and version settings, the operating
interface can be customized by yourself.
Smart VW: when this function is turned on and an atomizer is
installed, the system will recommend the best power for user.
Auto Eco: When the battery level is below 40% and unable to
support the preset power, the device will automatically enter
the POWER ECO mode for increasing endurance.
9. DIY MODE
VWH: high start-up speed
VWN: normal start-up speed
VWS: soft start-up speed
The SS, NI and TI modes are only available for the Stainless
Steel SUS316L, Nickel 200 and Titanium materials respectively.
Choose the MI mode to make a customized setting when other
heating wire materials are installed.
Customize the voltage according to your needs.
A direct voltage output mode depends on the battery level; the
effective coil resistance range is from 0.15Ω to 5Ω.
In DIY mode, when the coil resistance of the loaded coil is
between 0.03-0.05Ω, the system will prompt to enter the super
player mode, which is suitable for the RDA/RBA coil with ultra-
low resistance.
3 English
*DIY: DIY MODE
*SET: SYSTEM SETTING
*VWS/VWN /VWH
(Variable Wattage Mode)
*VT-SS/VT-NI/VT-TI/VT-MI
(Variable Temperature Control Mode)
*VV (Variable Voltage Mode)
*BP (Bypass Mode)
*SP (Super Player Mode)