Using Your Machine - Hoover WH20400 Serie Manual Del Usuario

• IMPORTANT •
• Please refer to floor manufacturer's care
recommendations before use and test the steam mop
on a discrete area of flooring to begin with.
• When using the steam mop, basic safety precautions should
always be observed.
• Don't aim the steam mop at people, animals, plants and
electrical components such as interior of ovens or wires. Never
touch the steam spray or floor head from a short distance. (There
is a risk of scalding)
• The steam mop is equipped with a thermostat and a thermal cut-
out. If for any reason the steam mop overheats it will switch off. If
this happens turn off and unplug the steam mop, allow to cool for
a least 2 to 4 hours and re-start.
• The steam mop and accessories get very hot during use, always
allow them to cool down before handling.
• Always unplug and switch off the steam mop when assembling.
• Always switch off the steam mop and allow to cool before
emptying the water tank or changing the cleaning pads/
accessories.
• Never use the steam mop without the microfiber pad properly
attached to the mop head.
9
All manuals and user guides at all-guides.com

Using your machine:

WARNING
! !
Never leave the steam mop in one
spot on any surface for an extended
period of time with a damp or wet
microfiber pad attached as this may
damage the floor surface.
When cleaning hard floors, your
steam mop should only be used on
tiles, linoleum, sealed hard wood
flooring, engineered hard wood,
laminate, vinyl, and sealed stone
floors. If used on waxed flooring, you
may experience loss of glossiness.
To reduce the risk of personal injury,
unplug the steam cleaner when
assembling the accessories.
Do not clean over floor
electrical outlets.
Do not use steam cleaner or press
the Steam Trigger without water
in the water tank.