Workzone WMW 300-1 Manual Del Usuario página 10

USA
Safety
e) Remove all adjusting tools or spanners before you switch the
power tool on. A tool or spanner in contact with a rotating part of the
device may result in injury.
Avoid an abnormal posture. Assume a stable position and keep
f)
your balance at all times. This will allow you to have better control of
the power tool in the event of unexpected situations.
g) Wear suitable clothing. Do not wear any loose-fitting clothing or
jewelery. Keep your hair, clothing and gloves away from the mov-
ing parts. Loose clothing, jewelery or long hair may get caught in the
moving parts.
h) If you can attach dust extractors or collectors, make sure that they
are connected and used properly. Using a dust extractor may reduce
risks associated with dust.
Only use the power tool if it is in impeccable condition and not
i)
damaged.
Do not remove or manipulate the safety equipment fitted on the
j)
power tool.
k) Do not modify the power tool or parts of it.
l) Only put the power tool aside once it has been switched off and
come to a stop.
m) Disconnect the power tool from the power supply when it is not in
use.
Using and handling the power tool
a) Do not overload the device. Use the right power tool for your
work. The right power tool will ensure that you work more effectively
and safely within the specified power range.
b) Do not use a power tool if its switch is defective. A power tool that
can no longer be switched on or off is dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove the rechargeable
battery before you make any adjustments to the device, change
the accessories or put away the device. This precaution will prevent
the power tool from accidentally starting.
d) Keep unused power tools out of the reach of children. Do not let
persons use the device if they are not familiar with it or have not
read these instructions. Power tools are dangerous if used by inexpe-
rienced persons.
e) Take good care of the power tools. Check to make sure that the
moving parts are functioning properly and not stuck, whether
10
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
1 866 326-6446
USA