Safety; Proper Use; Safety Notes; General Safety Notes For Power Tools - Workzone WMW 300-1 Manual Del Usuario

USA

Safety

Safety

Proper use

The multifunction tool is only designed for sawing, cutting, scraping and sand-
ing various materials in hard-to-reach areas. The multifunction tool may only
be used in indoor areas. It is only intended for private use and not suitable for
commercial purposes.
Only use the multifunction tool as described in this manual. Using it in any
other way is deemed improper and may result in damage to property or even
personal injury. The multifunction tool is not a children's toy.
The manufacturer or vendor cannot be held liable for damages incurred
through improper or incorrect use.

Safety notes

General safety notes for power tools

Warning! Read all safety notes and instructions.
Failure to follow the safety notes and instructions may result in an electric shock,
fire and/or severe injury.
Keep all safety notes and instructions for future reference.
Work place safety
a) Keep your work area clean and well lit. Disorganization or unlit work
areas may result in accidents.
b) Do not work with the power tool in areas with a risk of explosion
where flammable liquids, gases or dusts are present. Power tools
may produce sparks that could ignite dust or vapors.
c) Keep children and other persons away from the power tool while
you are using it. If you are distracted, you could lose control of the
device.
d) Make sure there is adequate ventilation. Stale air contaminated with
odors may cause symptoms of fatigue.

Electrical safety

a) The connector plug for the power tool must fit in the socket. The
plug may not be modified in any way. Do not use any adapter
plugs in combination with power tools with protective earthing.
Plugs that have not been modified and sockets with the proper fit
reduce the risk of an electric shock.
8
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
1 866 326-6446
USA