Vaporesso Target 80 Instrucciones De Uso página 7

PROTECTIONS
1. Short circuit protection & Low resistance protection:
When the load resistance is less than 0.1±0.01Ω, press power button could trigger the short circuit protection or Low
resistance protection, the device will close the output, at the same time OLED display will show "SHORT ATOMIZER".
2. No load protection:
When no load resistance is detected, press power button could trigger the no load protection, the device will close the
output, at the same time OLED display will show "CHECK ATOMIZER".
3. High resistance protection:
When the load resistance is greater than 5±0.5Ω, press power button could trigger the high resistance protection, the
device will close the output, at the same time OLED display will show " CHECK ATOMIZER ".
4. Low voltage protection:
When the voltage of the battery cell is lower than 3.3±0.1V, press power button could trigger the low voltage protection,
the device will close the output, at the same time OLED display will show "LOW BATTERY".
5. PCBA(Printed Circuit Board Assembly):
When the temperature of the PCBA(Printed Circuit Board Assembly) temperature sensor is higher than 70+5 ℃ /-10 ℃ ,
press power button could trigger the PCBA (Printed Circuit Board Assembly) over heat protection, the device will close
the output, at the same time OLED display will show "OVER HEAT".
6. Over discharge protection:
During the process of smoking, when the battery cell voltage is lower than 2.9±0.1 V, the device will close the
output automatically.
7. Over charge protection:
During charging, when the battery cell voltage is greater than 4.1±0.1V, OLED display will show "100%". At the end of
charging, battery cell voltage will not exceed 4.2±0.03V.
8. Auto-shut off protection:
When POWER button is held for 10±1 seconds, the device will close the output, at the same time OLED display will
show "OVER TIME".
9. Battery cell anti-reverse connection protection:
The inversion of battery cell will not damage the battery.
English
3