GB
Technical data
Rechargeable battery for cartridge gun
........................................... DP-CCG 1830
.....................................DP-CCG 1830 Set
Motor voltage U ............................. 18 V
Feed rate........... .................. 0.5-8.0 mm/s
Feed force .....................................2000 N
Cartridge volume ............................310 ml
Weight (with rechargeable battery) ...........
.......................................................1.86 kg
Sound pressure level
(L
) ..................... 81.0 dB(A), K
pA
Sound power level
(L
)..................... 92.0 dB(A), K
WA
Vibration (a
) .........< 2.5 m/s², K = 1.5 m/s²
h
Levels of noise and vibration were de-
termined according to the standards and
regulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another power tool.
The indicated vibration emission value
may also be used for an introductory as-
sessment of the exposure.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
20
.
Safety instructions
Ensure that the safety instructions are ob-
served when operating the trimmer.
Symbols and icons
Symbols on the trimmer:
= 3 dB
pA
= 3 dB
pA
Symbols in the manual:
off and times when it is switched
on but running without any load)
Carefully read these operating in-
structions.
Electrical appliances must not
be disposed of with the domestic
waste.
Warning symbols with informa-
tion on damage and injury pre-
vention.
Hazard symbol with information
on the prevention of personal
injury caused by electric shock.
Instruction symbols with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.