Samba W Clean 90 Manual De Instrucciones página 31

corners or other obstacles. The robot has
successfully attached to
the window when the Status Indicator Light
glows a continuous BLUE.
CAUTION: Please make sure there is a
13cm (5.1") clearance between the glass and
obstacles in the room like curtains or furniture.
4. Start
Start The robot using one of the
methods below.
- Press the START/PAUSE button on
The robot or on the Remote
Control to begin cleaning. The robot
will automatically
Chooses " N " or " Z " cleaning path.
- Choose your own cleaning path by
pressing the " N " or " Z " Cleaning Mode Button on the Remote Control
to begin cleaning.
"N" Cleaning Mode is
Best for tall windows.
Samba
cleans in an "N" path.
CAUTION: If the remote control not able to command the The robot
unit. Please check below steps matc h code for The robot and the
remote control.
Follow above preparation steps and stick the The robot onto window
glass.
1. Press the The robot left rear bumper without release, at the same time
press the START/PAUSE button on robot handle. The START/PAUSE
button will begin twinkles between blue and red light. Then release your
two hands.
WClean900
" Z " Cleaning Mode is
best for wide windows.
Samba WClean900
cleans in a "Z" path.
31