Samba W Clean 90 Manual De Instrucciones página 37

The robot has
moved
problem area and
is losing suction.
S t a t u s
Indicator light
flashes RED
Edge
Sensors are with
problem
Cleaning
was
Status
improperly
Indicator
Edge
light flashes
sensors
BLUE when
problem
The robot
There
adhered to
much dirt and
glass
debris
window.
There
much dirt and
Unit moves
debris on Glass
in an irregular
on the window.
Pattern during
cleaning.
While
robot
cleaning
R e m o t e
only the "START/
control does
PAUSE"
not work
works
Unit didn't matched code with Remote control or
match failure
Please use the Direction Stick on
over a the Remote Control to direct The
robot to a Safety position.
CAUTION: It is risky to use
direction stick command unit,
please make sure there is always
people standby the product.
Detection Please check if edge detection
sensors was stucked and clean the
dirts oni t. If it still does not work,
please contact customer service.
pads Remove the cleaning pad and
installed adhere neatly onto the Velcro.
detection Check if the edge detection
with sensors was stucked by cleaning
pad or dirts.
is too Clean the window by hand to have
a clean area for the The robot
on the adhere to first.
is too A. Clean the Driving Treads as
described in "Maintenance".
B. Replace the Cleaning Pad and
restart the cleaning cycle.
PRECAUCIÓN: The robot is
not suitable for too dirty glass
the The Press
is in to stop cleaning first, then press
mode, other buttons to command The
robot.
button
"START/PAUSE" button
37