Samba W Clean 90 Manual De Instrucciones página 32

2. Press the " Z " and "Repeat Clean" button on the remote control at
the same time.
3. The START/PAUSE button will turns to solid red light. At the same
time the speaker will buzz. It means the remote control successfully
match code with robot cleaner.
· PAUSA
Pause The robot during
cleaning by pressing the
START/PAUSE button on
the robot or on the Remote
Control.
Direct The robot to move
forward, backward, left and
right using the Direction Control
stick on the Remote Control when Paused. The robot cleans when the
Direction Control stick are used. Switch to a different Cleaning Mode
using the Cleaning Mode Buttons on the Remote Control when Paused.
· STOP
When Samba WClean900 completes its cleaning cycle, it returns to the
place it started and beeps.
32
1. Remove The robot
Grasp Robot's
approximately 5 seconds and the fan will stop.
Remove The robot from the window. Polish away any
marks left on the glass from Robot's removal with a
mopping cloth.
Handle. Pressand hold for