Important Information; Identification Of Parts; Date Of Manufacture; Assembling Your Stroller - Evenflo Snugli Manual Del Usuario

IMPORTANT INFORMATION

Child Requirements:
Maximum Weight: 50 lbs (22.6 kg)
IMPORTANT: Read instructions carefully before use. Save these instructions for future reference. It is very important to assemble
the stroller according to these instructions. DO NOT USE YOUR STROLLER UNTIL YOU HAVE READ AND UNDERSTOOD
THESE INSTRUCTIONS.
If you are missing parts, do not use stroller and call ParentLink at 1-800-374-3603 (USA), 1-937-773-3971 (Canada),
or 01-800-706-12-00 (Mexico).
Registration Information
Please register this product so we can reach you if there is a safety alert or recall. We will not sell, rent, or share your
personal information.
To register your product, please complete and mail the card that came with it or visit our on-line registration at
https://plweb.evenflo.com/productreg.aspx
For future reference, record the Model Number and Date of Manufacture below. You can find this information
on one of the rear stroller legs.
Model Number:

IDENTIFICATION OF PARTS

(2) Front wheel assemby
(2) Rear wheel
*These items are sold separately.
Infant Car Seat (ICS)
Adapter
*
Visit www.Snugli.com, or your retailer, for more information.
2

Date of Manufacture:

Canopy
Stroller Style Set
1
A
2
3
4
I
Seat Assembly
H
Red Wheel
Disc
D
B
C
Install a front wheel
Make sure it locks into place with an audible click. Pull each front wheel
downward to make sure it is locked securely.
Repeat on the other side.
F
E
Unlock the folding latch
G
Lock the rear wheels by stepping downward on the brake pedal
Place your foot on the rear axle, as shown, to steady the stroller.
I
Grab the handle
open position.

ASSEMBLING YOUR STROLLER

A
Install a rear wheel by pressing the locking
B C
button and sliding the wheel axle into
D
the housing until it locks in place. Note tha
the slot in the axle must be straight up and
down, as shown, for it to lock into the housing
Pull the wheel to make sure it is locked in
place. Repeat on the other side.
Note: When the wheel is locked into place
properly, the red wheel disc will fit completely into
the housing.
E F
in one of the front pivot assemblies , as shown.
G
.
H
.
and pull upward until the stroller frame locks into the
J
Squeeze the handle
J
locking button and
adjust the handle to the
desired length.