Mesko MS 3057 Manual De Uso página 4

Contact professional electrician in this matter.
15. Accessible surface temperatures can be high when the appliance is operating.
Never touch the hot surfaces of the appliance.
16. Due to the high temperature you should be careful when removing the prepared
dishes, removing hot grease or other hot liquids. Be careful, there can be hot steam
presence during use of the appliance.
17. This electrical appliance contains a heating function. Surfaces, also different than the
functional surfaces, can develop high temperatures. The equipment shall be touch only at
intended handles and gripping surfaces, and use heat protection like gloves or similar.
During or after use, please do not touch the baking tray or the hot area on the shell before
the temperature goes down.
18. The device must cool down before you store it.
19. Do not place products made of cardboard, paper, plastic materials or other flammable
or melt able objects in the device.
20. The device is not designed to work with external schedulers or separate remote
control system.
21.Do not insert food portions that use whole oven volume, as it may cause fire and
destruction of the device.
22.The power cord may not be placed above the device and it may not touch or be
located near hot surfaces. Do not place the device under a mains socket.
23. Do not move or carry the device during operation. After the operation it can be moved
only if it had enough time for cooling down.
24. Before and during use, make sure that the power cord is not stretched over an open
flame or other heat source or sharp edges that may damage the insulation of the cable.
25. Before first use, remove all packaging components. Attention! In the case of a casing
with metal parts, on these elements a slightly visible protective foil can be stretched,
which should also be removed.
26. NEVER cover the device during operation or when it does not cool down completely,
remember that the heating elements of the device take time to cool down completely.
27. SAVE CAREFULLY if you use the device on surfaces sensitive to high temperatures.
It is recommended then to use insulating washers.
DESCRIPTION OF DEVICE: Sandwich maker MS3057
1. Handle 2. Power indicator (red)
3. Ready indicator (green) 4. Buckle
5. Heating plates 6. Upper housing
7. Bottom housing
BEFORE FIRST USE
Open device by holding the handle (1). Before that, release the buckle (4).
1. Remove all cartons and labels from housing and from inside (between heating plates).
2. Wipe heating plates first with wet and next with dry cloth.
3. Apply a bit of edible oil or other plant fat on the heating plates, close and plug device to the socket with grounding, the power
indicator lamp will light (2) in red.
4. Keep the device running for few minutes to get ride of manufacturing odour. Device could emit some smoke during this time. That's
normal.
5. Clean the device according chapter "Cleaning ".
4