Attention Please take care. Avoid tripping over by the power cord when operating the appliance, Arrange the power cord so its out of
your way. Remember to remove the plug after use.
Before using the appliance for the first time
-Remove all the packaging materials and wash the heating plate(6).Oil collecting tray(7) and grill lid(2)
Important: Dry all the different parts thoroughly.
This applies especially to the power inlet socket.
Never immerse the power cord with regulator(3) in water. Heat the grill to its maximum setting for about 3-5minutes,with the roasting lid
in place and without any food. Residues left from manufacturing may cause some smell and smoke when the appliance is used for the
first time.
USING THE DEVICE
After Instalation
1.Connect the thermostat (3) to the thermostat socket (5). Fig. 6
2.Insert the grounding plug.
3.Adjust the baking temperature with the thermostat (3), to the type of food being grilled. To keep food warm, set the thermostat to the
"ON" position and cover with the lid (2) holding the handle (1),
When the thermostat indicator light (4) goes out, it means that the grill has reached the right temperature and is ready for use
When the indicator light is on, it means that the grill is heating up. During operation, the thermostat light turns on and off to indicate that
the thermostat is working.
5. After grilling, turn the thermostat to the „OFF" position and disconnect the grill from the power source and allow it to cool down.
CAUTION: When turned on for the first time, the grill may produce a small amount of smoke due to heating of some parts. It's normal.
Suggestion: leave the grill on for a few minutes to get rid of the factory smell.
CLEANING AND MAINTENANCE
1.Before cleaning the grill, make sure it is cool to the touch and disconnected from the power source.
2.Clean the hob, lid and fat tray in warm water with a mild washing-up liquid. Do not soak the thermostat socket (5) in water. Do not clean
the appliance with sharp, abrasive cloths or sponges, or use cleaning powders as they may damage the smooth, non-stick coating of the
plate.
3 After cleaning, wipe the cleaned parts dry.
4. Do not immerse the thermostat, cable or plug in water or other liquids.
TECHNICAL DATA
Power source: 220-240V~ 50/60Hz
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
Worn device should be returned to the appropriate point storage because it is dangerous in the device
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
SICHERHEITSBEDINGUNGEN WICHTIGE ANWEISUNGEN ZUR SICHERHEIT DER
BENUTZUNG BITTE
LESEN SIE SORGFÄLTIG DURCH UND BEWAHREN SIE DIE ZUKÜNFTIGE
VERWEISE AUF
Die Garantiebedingungen sind unterschiedlich, wenn das Gerät für kommerzielle Zwecke
verwendet wird. "1.Lesen Sie das Produkt vor der Verwendung sorgfältig durch und
Power Nom.: 1680-2000W Power Max: 2500W
(DE) DEUTSCH
9