Snapper S50xt Serie Manual Del Operador página 12

Zero-Turn Rider Controls
C Deck Lift Lock Lever
D Parking Brake
E Ground Speed Control Levers
F Fuel Level Gauge (One per fuel tank)
G Fuel Tank Cap (One per fuel tank)
H Transmission Oil Fill / Tanks (One per transmission)
I Transmission Release Levers (One per transmission)
J Seat Adjustment Lever
K Removable Floor Plate
Deck Lift Pedal, Cutting Height Adjustment Pin, and Deck
Lift Lock Lever: The deck lift pedal (A, Figure 5), the cutting
height adjustment pin (B), and the deck lift lock lever (C) are
used together to control the cutting height of the mower deck.
See Cutting Height Adjustment for instructions on using these
controls.
5
Cutting Height Adjustment
Deck Lift Lock Lever
Parking Brake: Pull the parking brake lever up and
back to engage the parking brake. Move the lever fully
forward and down to disengage the parking brake.
Note: To start the unit the parking brake must be engaged.
Engaging the parking brake locks the ground speed control
levers in the NEUTRAL position. The parking brake must be
disengaged before moving the ground speed control levers
out of the NEUTRAL position.
DISENGAGE: Releases the parking brake.
12
ENGAGE: Locks the parking brake.
Ground Speed Control Levers: These levers control the
ground speed and direction of the rider. The left lever controls
the left rear drive wheel and the right lever controls the right
rear drive wheel.
6
FORWARD
NEUTRAL
REVERSE
N/A NEUTRAL LOCKOUT POSITION
The parking brake must be disengaged before attempting to
move the ground speed control levers from the NEUTRAL
position.
Moving a lever forward (A) from the NEUTRAL position (B)
increases the FORWARD speed of the associated wheel, and
pulling back (C) on a lever increases the REVERSE speed.
Moving a levers outwards (D) from the NEUTRAL position
locks the levers in the NEUTRAL LOCKOUT position.
Note: The further a lever is moved away from the neutral
position the faster the drive wheel will turn.
See the Zero-Turn Driving Practice section for steering
instructions.
Fuel Tank Cap: To remove the cap, turn counter-clockwise.
Fuel Level Gauge: Displays the fuel level in the tank.
Transmission Release Levers:
snapperpro.com