Removing/Replacing Your Refrigerator And Freezer Handles, Doors And Drawers - Kenmore 111.7302 Serie Manual De Uso Y Cuidado

NOTE: Removing the doors is always recommended
when it is necessary to move the refrigerator through
a narrow opening. If it is necessary to remove the
handles, follow the directions below.
HOW TO REMOVE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Removing Refrigerator Handle
U se the provided 2.5 mm hex key to loosen the
set screw located on the top inside end of the
handle far enough to pull the handle free from
the underlying mounting bolt. Carefully slide the
handle up to free the bottom end of the handle
from its mounting bolt.
HOW TO REPLACE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Removing Refrigerator Handle
Pl ace the bottom end of the handle over the lower
mounting bolt on the door and carefully slide
handle down until it stops. Lower the top end of
the handle over the top mounting bolt. Use a 2.5
mm hex key to tighten the set screw to secure the
handle in place.
REFRIGERATOR INSTALLATION
Mounting
Bolts
11
Mounting Bolt
Set Screw
hex key