Kenmore 111.7302 Serie Manual De Uso Y Cuidado página 15

HOW TO REMOVE THE FREEZER DRAWER
WARNING : Use two or more people to remove and
install the freezer drawer. Failure to do so can result in
personal injury, product or property damage.
1. Take out the ice bin first, and then take out the upper
freezer drawer by lifting it up.
2. Remove lower freezer basket by pulling up and tilting
toward refrigerator until it can be removed from the
freezer drawer/door assembly.
3. Push the rail support locking tabs to release the main
freezer drawer rails from the cabinet while slightly
pulling the exterior freezer drawer outwards, so that the
locking tab does not return to the locked position. The
locking tabs are located in the freezer compartment to
the rear of the main rail assembly (which is attached
to main exterior freezer drawer) as shown in the
illustration below.
REFRIGERATOR INSTALLATION
Locking T ab
15
4. Pull exterior freezer drawer to fully disengage the rail
assembly from the unit. Use 2 people for this task as
the door is heavy and awkward to handle.
CAUTION : Do not hold the handle when removing or
replacing the drawer. The handle may come off and it
could cause personal injury.
5. Place the door on a non-scratch surface.