14. Cassette operation
Press the
/ FUNC. button once or several times until TAPE appears on the dis-
play.
14.1. Inserting a cassette
Press the
button to open the cassette compartment.
Insert a cassette into the compartment grooves with the tape side facing up.
The side to be played faces forwards.
Push the compartment closed.
14.2. Playing, stopping and pausing a cassette
Press the button to start playing the cassette.
You can stop playback by pressing the
You can pause playback by pressing the button. Press the button again to re-
sume playback.
Once the end of the tape is reached, playback stops automatically.
14.3. Fast-forwarding and rewinding
Press the button (rewind) or button (forward) to fast forward or rewind the
tape.
Press the
button to stop fast-forwarding or rewinding. You can also press
this button if you have reached the end or the beginning of the tape.
Do not switch immediately from fast-forwarding or rewinding to playing. Stop
the tape first to protect the tape from wear.
15. Cleaning
Always disconnect the device from the mains before cleaning it.
Only use a dry, soft cloth to clean the device. Do not use chemical solutions or
cleaning products because these may damage the device's surface and/or markings.
Do not touch or clean the lens in the laser unit.
16. Storing the device when not in use
If you are not going to use the device for a long period of time, store
it in a dry, cool place and ensure that the device
is protected from dust and extreme temperature fluctuations.
Disconnect the mains plug from the socket and remove the batteries from the de-
vice.
54
button.