Uline H-2128 Manual Del Usuario página 2

Figure 1
Figure 2
Figure 3
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS
1. Verify all parts are present before beginning.
2. Flip the tabletop upside down. Take one leg at a
3. Before tightening the bolts, insert cross brace and
4. Flip the table upright and loosely attach the two
5. Ensure that the tabletop and seats are level, then
1-800-295-5510
uline.com
Hardware is attached to cross braces.
time and loosely attach the end of the leg to the
tabletop with the leg braces on an inside mount,
using one bolt, two washers and one nut.
(See Figure 1)
bolt to the table frame using one bolt, two washers
and one nut. (See Figure 2)
seats to the legs with the leg braces having an
inside mount, using one bolt, two washers and one
nut. (See Figure 3)
tighten each bolt, finishing with the cross braces.
NOTE: H-2301 mounting hardware sold
separately.
0321 IH-2128