Dometic CC09 Instrucciones De Uso página 16

Using the hob
Switching on the cooking zone
➤ Put the control knob to the neutral position.
➤ Press the control knob in, hold it down and turn it anti-clockwise to the
"large flame" position.
➤ Keep the control knob pressed down for not more than 15 seconds until it
is ignited and the thermoelectric safety pilot has responded.
➤ Release the control knob.
✓ The burner is on.
✓ The status LED
✓ The warning LED
➤ If the burner goes out after releasing the control knob,
wait at least 60 seconds before you ignite it again.
NOTE
I
When using for the first time or after changing a gas cylinder, the
burner might not ignite after 15 seconds due to a lack of air in the
gas pipe.
In this case, ignite it again.
Adjusting the temperature
➤ Adjust the temperature with the control knob to between the "large flame"
and "small flame".
Switching off the cooking zone
➤ Turn the control knob to the neutral position.
✓ The status LED
✓ The warning LED
The warning LED switches off when the surface has cooled down and can
be safely touched again (this takes about 12 minutes once the cooking
zone has been switched off).
➤ Close the shut-off valve on the gas cylinder if it will be out of operation for
a long time.
16
All manuals and user guides at all-guides.com
lights up.
lights up.
is off.
stays lit.
CC09, CCK09, CC11
EN