Get Going; Connecting To External Devices - VIETA VH-MI120 Manual De Usuario

02 Get going

1. Connecting to power
Insert the Mains Plug into a suitable wall socket and turn the socket on.
Press the STANDBY button to turn the Speaker on.
2. Using the Remote Control
The Remote Control can be used to operate the Speaker. Before using the Remote
Control, the Safety Tab should be removed.
Simply pull out the Safety Tab from the remote control, as shown below.
To use the Remote Control, simply direct it towards the front of the Speaker and press the
desired buttons.
DON'T FORGET! When replacing the battery make sure that you use the same size and
type.
3. iPod Docking
iPod can be connected to the Speaker to allow all your songs to be played through the
speakers.
To connect an iPod to the Speaker, select the compatible adaptor
from one of the 7 iPod Adaptors supplied. The iPod Adaptors have
marked on the bottom which clearly identify which iPod they should
be used with.
If your iPod is not compatible with any of the supplied iPod Adaptors, use the adaptor
supplied with your iPod.
Place the iPod Adaptor into the recess on the top of the Speaker and then insert your
iPod into the Adaptor.
DON'T FORGET! Your iPod will charge while docked when the Speaker is in Standby
mode.

4. Connecting to External Devices

The Speaker can be connected to a number of external devices using the supplied 3.5
mm Stereo cable (supplied)
5