VIETA VH-MI120 Manual De Usuario página 24

04 Troubleshooting
Problem
Radio sound distorted.
No radio sound.
The iPod will not play
No iPod sound.
If none of the above can solve your problems, perform a reset as described on
page 11.
05 Specifications
Model Number
Power Supply
Radio Frequency Coverage
Speaker Side
Impedance
Power Output RMS
Power Output MAX
Frequency Response
Net Weight
Dimensions
IMPORTANT: Due to continual revision and improvement on our products design,
specifications are subject to change without notice.
If at any time in the future you should need to dispose of this product please.
Note that: Waste electrical products should not be disposed of with household
waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.(Waste Electrical and Electronic Equipment Directive)
Possible Cause
1. The station is not tuned
in.
2. There is a poor signal in
the area.
1. The Speaker is not in
tuner mode.
2. The volume has been
muted or is on the minimum
setting.
1. The Speaker is not in
iPod mode.
2. The iPod is not connected
correctly.
1. The Speaker is not in
iPod mode.
2. The volume has been
muted or is on the minimum
setting.
• VH-MI120
• AC～100-240V 50/60Hz DC 15V2A
• FM: 87.5MHz - 108 MHz
• 2"×2 +3.5"
• 4Ω/channel
• 4.5W x 2+15W (THD+N=10% f=1KHZ)
• 9W x 2+30W
• 60HZ-20KHZ
• 1.68KG
• 140mm (W) x 157mm (H) x 225mm (D)
9
What to do
1. Fine tune the station.
2. Reposition the Speaker.
1. Press the MODE button
until Tuner is selected.
2. Adjust the volume level.
1. Press the MODE button
until iPod is selected.
2. Reconnect the iPod.
1. Press the MODE button
until iPod is selected.
2. Adjust the volume level.