VIETA VH-MI120 Manual De Usuario página 21

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Daily use
03
Standby
1. To turn on the Speaker, press the STANDBY button.
2. To turn off the Speaker, press the STANDBY button again.
Adjusting the Volume
1. To increase the volume, rotate the VOLUME CONTROL clockwise.
2. To decrease the volume, rotate the VOLUME CONTROL anti-clockwise.
3. You can also press the MUTE button to turn off the sound. To turn on the sound back,
press the MUTE button again, or rotate the VOLUME CONTROL clockwise.
Mode
The Speaker has four modes for operation. These are:
• iPod
• Aux
• FM Radio
• SD
DON'T FORGET! When it's in USB mode, the display will show "SD" not "USB"
Brightness
1. Press the BRIGHTNESS button on the remote control repeatedly to cycle through the 4
display brightness settings.
Memory Cards
You can play MP3 files stored on USB by inserting it into the USB slot above the
Speaker.
iPod
You can dock an iPod/iphone with the Speaker and listen to all your favourite songs
through the Speaker's speakers. With the iPod dock, you can control all the basic
functions of the iPod using the Speaker or Remote Control.
DON'T FORGET! If using iphone, there is an authentication time around 3 seconds. After
authenticating, iphone and the speaker are synchronizing.
Selecting iPod Mode
1. Press the STANDBY button to turn on the Speaker
2. Press the MODE button repeatedly until "iPod" is displayed on the LCD Display.
3. Carefully inset your iPod into the iPod dock as described on page 5.
DON'T FORGET! The iPod battery is automatically charged when the Speaker is in
standby mode.
When iPod is connected to the dock in iPod mode, iPod will autoplay after
4.
authenticating.
6

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido