Troubleshooting; Functional Aspects That Should Not Be Mistaken For Malfunctions; Recommendations For Energy Savings - mundoclima MU-UNIC Serie Manual De Instalación. Instrucciones Para El Uso

3.6

TROUBLESHOOTING

It is extremely important for the user to know when
behaviour that seems like a malfunction really isn't.
Among these are some (that we will indicate) that the
user can easily correct following our simple instructions,
while in other cases it is necessary to get in touch with
our service personnel.
We also wish to remind you that any attempts to repair
the equipment made by unauthorized personnel will
immediately invalidate the warranty.
3.6.1
The compressor does not start up again immediately after
Functional
a stop (it takes about three minutes to start again).
aspects that
The operating logic of the device provides for a delay
should not be
between stoppage of the compressor and starting up
mistaken for
again.
malfunctions
This is to safeguard the compressor.
- When heating, on versions with the heating pump, the
machine does not start emitting heat until a few minutes
after the compressor starts.
If the fan should go into operation at the same time as
the compressor, for the first few minutes it would emit
cold air into the room (and this could disturb the
occupants) as the heating function needs some time
to warm up.
This is why the fan startup is delayed until after the
compressor has started.
CHAP. 3.7 RECOMMENDATIONS FOR
ENERGY SAVINGS
- Always keep the filters clean (see chapter on
maintenance and cleaning).
- Keep the doors and windows closed in the air-
conditioned rooms.
- Keep sunlight out of the room by using curtains, lowering
the shades or closing the shutters.
- Do not obstruct the air flow (intake and outlet) on the
units; this in addition to reducing the performance of the
system, will jeopardize correct operation and could
cause irreparable damage.
MU-UNIC
All manuals and user guides at all-guides.com
47