Makita 448 Manual De Instrucciones página 20

EN
C - USING THE APPLIANCE
1
....
FOR USE AS A DRY VACUUM CLEANER
CAUTION: •
•
•
2
....
FOR USE AS A WET VACUUM CLEANER
CAUTION: •
- When the vacuumed liquids reach the maximum level inside the drum, suction is auto-
matically shut off by the safety fl oat.
The user is alerted by the increase in the rpm rate of the motor and by the lack of
suction.
Switch off the appliance immediately and empty the drum.
3
.... TO VACUUM LARGE QUANTITIES OF LIQUID
- To ensure partial air fl ow make sure the crevice tool is never completely immersed
fi g. "C2".
4
....
TO USE A POWER TOOL WITH THE VACUUM CLEANER
CAUTION: •
•
- Always keep the fi lter system in good working order to ensure effi cient operation.
- We recommend cleaning the cartridge fi lter as illustrated on pg. 21.
- Attach the connector (M) of the fl exible hose (code 01 321B0N) to the air inlet connector
(R) fi g. "C3".
- Fit the adapter (U) onto the power tool attachment fi g. "C4".
- Plug in the power tool, then the vacuum fi g. "C5"-"C6".
- Hook the power tool power supply cord onto the fl exible hose fi g. "C7".
- Switch on the appliance.
The 3-stage cartridge fi lter must always be used.
Keep the cartridge clean.
Replace it if overly encrusted or worn.
Remove the cartridge fi lter and if there is a paper fi lter bag remove it too
fi g."C1".
The 3-stage cartridge fi lter must always be used.
Remove the foam fi lter if installed.
- 20 -