Correcting Common Problems - Polaroid Econo ID-104 Manual Del Usuario

Correcting common prob
From time to time you may observe faults with your photos. The fol-
lowing information will help you solve problems you may encounter.
Picture Fault
Repeated,
evenly-spaced
spots
Missing corners,
or orange-red
marks along
edges
Rectangular
outline in print
Small, white
specks, pink
lines, streaks or
blotches
Muddy-looking
print
Broad streak or
mark across the
picture.
Very light or no
image
23 English
All manuals and user guides at all-guides.com
Problem
Dirty developer
rollers
Pulling the film tab
from the camera at
an angle.
Dried developer on
the rollers.
The white leader was
not pulled
completely off prior
to pulling the film
tab; white tab passed
through the rollers
with film.
Pulling the film
through the rollers
too fast.
Development time
not long enough.
Hesitating while
pulling the film from
the camera.
Film fogged or
extremely
overexposed.
lems
Solution
Clean developer rollers
Pull the yellow/black
film tab straight from
the camera.
Clean the rollers.
Pull white tab
completely out of the
camera before pulling
the film from the
camera.
Pull the film using a
smooth, even,
moderate pull speed.
Develop film for time
recommended in film
instruction sheet.
Pull the film tab
straight out in one
motion, without
hesitation.
Do not remove the
safety cover prior to
loading the film.
Do not open the
camera and remove the
film pack while taking a
picture.