2. CHARCOAL FILTERS
To replace the charcoal filters, proceed as follows: remove the metal filters
as described above. The two filters located at the ends of the motor can
now be easily accessed.
To install the new fi lters see picture.
To order new filters, use the coupon enclosed with this booklet or provided
by the distributor.
I
LIGHTING
SPOTLIGHT
How to replace the dichroic lamp:
a) Check that the equipment is disconnected from the power supply.
b) Remove the lamp with the help of a screwdriver (see figure).
c) Replace the lamp with a similar one (dichroic, max 20 W, 12 Volt).
L
MAINTENANCE AND CLEANING
Constant maintenance ensures the correct operation and efficiency of the ap-
pliance over time. Special attention should be paid to the metal grease-trap-
ping filters and the charcoal filters. Frequent cleaning of the filters and their
supports will ensure that fats and grease do not accumulate on the range
hood, with the consequent risk of fire.
16
All manuals and user guides at all-guides.com
A
ASSEMBLY AND REPLACEMENT
Dicroic Lamp