Herschel Select XLS Serie Instrucciones De Instalación Y Funcionamiento página 7

Operation – using with XLS controls
All Herschel Select XLS panels are equipped with a SMART-R XLS receiver on the rear of the rear panel. SMART-R
will pair wirelessly (via RF) with XLS thermostatic controllers. The T-BT is a battery operated thermostat. Wi-Fi and
APP control is not possible with T-BT.
For WiFI and APP control the T-PL is a simple to use thermostat control which plugs into a mains socket. These are
perfect for retrofits and portable heating solutions.
For new build and renovations chose the hard wired T-MT mains powered thermostat which is WiFi enabled.
All control options can be paired with the SMART-R. The controller then sends commands to turn the heater on or
off according to the room temperature and program.
Be sure to follow the pairing instructions closely. Online help is also available via the Help & Support section of
your local Herschel Website.
SMART-R
Pairing SMART-R to an XLS controller
The heater is equipped with our built-in SMART-R XLS receiver (located on the rear of the panel).
There is a power ON/OFF switch on the receiver and there are indicators to show if the panel is paired to a
controller and if the heating is ON or OFF.
The heater needs to be paired to a Herschel XLS controller (supplied separately). Once paired it will receive ON/OFF
commands from the controller.
IMPORTANT: The panel itself does not have an in-built temperature sensor. Efficient use of the heater is only
possible by pairing it with an XLS controller. The SMART-R XLS receiver will not pair with a non-Herschel XLS
controller. SMART-R WILL NOT pair with a Herschel iQ series control (T1 or Hub).
The Herschel XLS controllers can be paired with and control one or many heater panels. The temperature of the
room will be measured by the XLS controller. It is normal to use one controller per room but if it is a large room
(such as open plan area) you may want to consider more than one thermostat controller. If there are multiple
heating panels per room, pair each panel to the relevant room controller.
T-BT
T-MT
T-PL
(no WiFi)
Select XLS
ENGLISH