Descargar Imprimir esta página

Sunny Health & Fitness SF-E3890 Instrucciones De Montaje página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 4:
Attach 2 Pedal Support Tubes
(No. 5L/R) to 2 Cranks (No. 22L/R)
with 2 Bolts (No. 31L/R), 2 Wave
Washers (No. 32), then put on 2
Spring Washers (No. 34) and 2
Nylon Nuts (No. 35L/R) to the end
of 2 Bolts (No. 31L/R) using Allen
Wrench (No. 92) and Spanner (No.
95).
Note:
Please do not fully tighten at this
time.
The Bolts (No. 31L/R) is label L or
R. Make sure to turn the Right Bolt
(No. 31R) clockwise, and Left Bolt
(No. 31L) counter-clockwise.
The Left Nylon Nut (No. 35L) is
black on the inside and Right Nylon
Nut (No. 35R) is white on the
inside. Make sure to turn Right
Nylon
counter-clockwise and Left Nylon
Nut (No. 35L) clockwise.
Attach 2 Swing Bars (No. 6L/R) to
2 Pedal Support Tubes (No. 5L/R)
with 2 Screws (No. 39), 2 Flat
Washers (No. 19) and 2 Nylon
Nuts (No. 14) using Allen Wrench
(No. 94) and Spanner (No. 93).
Fasten 2 Hex Screws (No. 24) for
STEP 3 tightly first, then fasten 2
Bolts (No. 31L/R), 2 Nylon Nuts
(No. 35L/R) tightly. Then cover with
the 2 Caps (No. 23) and 2 Caps
(No. 99).
Note: Ensure that all bolts and
washers are in place and partially
threaded
tightening any of them.
14
Nut
(No.
in
before
completely
35R)

Publicidad

loading