How The Energizer Works; Practical Hints - Gallagher M6000i Instrucciones

HOW THE ENERGIZER WORKS

The energizer sends electrical pulses along the fence line, about one second apart.
These pulses give the animal a short, sharp, but safe shock. The shock doesn't harm
the animal. It is sufficiently memorable that the animal never forgets the shock, and
will avoid the fence.

Practical Hints

• Check your local ordinance on fencing laws: local laws may require a permit
before use.
• Check the fence periodically. Remove any fallen branches, weeds or shrubs
because these will cause the fence to short out and will reduce animal control.
• All animals need time to learn to respect the fence. It may take several days to
train the animal and the fence may require minor adjustments.
• Animals that are prone to jumping may be difficult to confine. You may need to
try different fence heights to determine the best height.
• Use top quality insulators: low quality or cracked insulators and plastic tubing
are not recommended because they will cause shorting.
• Use joint clamps on all steel wire connections to ensure a high quality circuit.
• This energizer must be earthed using galvanised metal earth stakes to ensure
the electric fence works correctly.
• Double Insulated Cable should be used in buildings, under gateways and where
soil could corrode exposed galvanised wire. Never use household electrical
cable. It is made for a maximum of 600 volts and will leak electricity.
• On permanent power fencing, use high tensile 12.5 gauge (2.5 mm) wire.
8
Gallagher 3E5260 M6000i/M12000i Energizer User Manual