Troubleshooting - Tronic Qi TPBQ 10000 A1 Instrucciones De Utilización Y De Seguridad

to start the Qi wireless charging process. For the details of
wireless charging operation, please refer to the section "Qi
wireless charging".
To end the charging process, disconnect the USB charging
cable or remove the device from the Qi charging surface
and then press the On/off button
power bank
If all USB output ports and wireless charging are used
simultaneously for charging devices, a voltage of 5 V will be
output at all outputs. The maximum output current must not
exceed 3 A for all outputs.
P Troubleshooting
= Problem
= Cause
= Solution
It may not be possible to charge a Qi compatible
device.
The mobile device is already fully charged.
Take away the fully charged device for use, until its internal
battery was drained again. Then put device back to Qi
charging surface
The mobile device has become very hot as a result of
charging.
Remove the mobile device from the Qi charging surface
for a few hours to let it cool down, and also check if your
product was damaged.
.
1
2 for charging.
3 twice to switch off the
US-EN 23
2
2