Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Emissivity
Most organic materials and painted or oxidized surfaces have an emissivity of 0.95
(pre-set in the unit). Inaccurate readings will result from measuring shiny or
polished metal surfaces. To compensate, cover the surface to be measured with
masking tape or flat black paint. Allow time for the tape to reach the same tempera-
ture as the the material underneath it. Measure the temperature of the tape or paint-
ed surface.
Maintenance
Lens Cleaning: Blow off loose particles using clean compressed air. Gently brush
remaining debris away with a camel's hair brush. Carefully wipe the surface with a
moist cotton swab. The swab may be moistened with water. NOTE: DO NOT use
solvents to clean the plastic lens.
Case Cleaning: Use soap and water on a damp sponge or soft cloth. NOTE: DO
NOT submerge the unit in water.
Troubleshooting
Code
Problem
– – – (on display)
Target temperature
is over or under range
Battery icon appears
Possible low battery
Blank display
Possible dead battery
Laser doesn't work
Low or dead battery
English
Action
Select target within specifications
Check and/or replace battery
Check and/or replace battery
Replace battery
5
Publicidad
