HURAKAN HKN-ICF18T Manual De Instrucciones página 28

EN
- TIMER mode. "0:00" will appear on the display when this mode is selected, with ":00"
blinking. Turn the knob to select the number of minutes you need, then confirm the value by
pressing the TIMER button again. "0:" will start blinking, then turn the knob if you need to set
a certain number of hours of the burner operation. Wait for 5 seconds, then the timer value
will be fixed and the countdown will start on the screen. The timer can be set up to 24 hours of
operation. If you need to deactivate the timer, touch the TIMER button 3 times in succession.
5. Press the ON/OFF button after cooking is finished , and the OFF sign will appear on
the display. Remove the dishware from the burner only after it is turned off.
6. Wait for the cooling fans to stop working and shut off the power supply.
HKN-ICF18T
1. Connect the cooker to the power mains, the buzzer will issue a signal, and the "OFF" value
will be displayed on the screen. If no button is pressed, the cooker will turn off.
2. Place the dishware on the burner.
3. Tap ON/OFF, and the cooker will switch to the HOT POT operation mode; the heating power
will be shown on the display. Press the corresponding key on the control panel to change the
cooking mode.
4. The HOT POT mode is intended for self-control of the heating power. Press the + or - buttons
to change the power.
5. The STEW mode is intended for automatic cooking. The power change function with the +
or - buttons is blocked. The heating process will end automatically.
6. The BBQ mode is intended for self-control of the heating power. Press the + or - buttons to
change the power.
7. The FRY mode is intended for self-control of the heating power. Press the + or - buttons to
change the power.
8. The SOUP and PORRIDGE modes are automatic. The power change function with the + or -
buttons is blocked. The heating process will end automatically.
9. The TIMER mode. "0:00" will appear on the display when this mode is selected, with ":00"
blinking. Turn the knob to select the number of minutes you need, then confirm the value by
pressing the TIMER button again. "0:" will start blinking, then turn the knob if you need to set
a certain number of hours of the burner operation. Wait for 5 seconds, then the timer value
will be fixed and the countdown will start on the screen. The timer can be set up to 24 hours of
operation. If you need to deactivate the timer, touch the TIMER button 3 times in succession.
28