Quick User Guide - Anycom HCC-250 Manual De Instrucciones

3.2 Quick User Guide

You can follow the instructions listed in Table 1-7 below to operate your HCC-250 Car-Kit devices. (Please refer to section 1 for details of key and key press
duration definitions.)
Note: Your Car-Kit devices can only talk to paired Bluetooth devices. For devices supporting only the Handsfree Profile (HFP), you also need to establish
Bluetooth connection between your Car-Kit and your phone before making and answering calls.
Table 1: Power on/off
CURRENT STATUS
FUNCTION
PHONE
Turn On
Turn Off
Table 2: Pairing/Connections
CURRENT STATUS
FUNCTION
PHONE
Enter pairing
mode
Erase all paired
profiles
Pair Car-Kit with
Power on
phone
Connect (CarKit Standby
with phone) (disconnected)
Disconnect Standby (connect)
Page 8
OPERATION
HCC-250
Press and hold button
Power Off
least 3 seconds
Press and hold button
Standby
least 3 seconds
OPERATION
HCC-250
Press and hold button
Power Off
at least 6 seconds
Press and hold button – for at
Paring Mode
least 3 seconds
Follows your phone`s user
guide to complete pairing
Paring mode
procedure.
Passkey is "0000"
Standby Press button
(disconnected) connection from the phone
Press and hold button
at least 3 seconds or refer to
Standby
phone manual to initiate the
(connect)
connection from the phone
side.
HCC-250 - English
HCC-250 INDICATOR
AUDIO TONE
for at
2 power-up tones
for at
2 power-down tones
HCC-250 INDICATOR
AUDIO TONE
2 power-up tones, and then 1
for
pairing tone
1 connecting tone
or set up
1 connecting tone
for
LED INDICATOR
LED Pattern 1
LED Pattern 5
LED INDICATOR
LED Pattern 3
LED Pattern 1
LED Pattern 2
LED Pattern 2
LED Pattern 1