Adler europe AD 8154 Manual De Uso página 4

20.Do not use for commercial or medical purposes.
21.It is recommended that you weigh yourself at the same time each day.
22.The measurements given by the scale can be misleading if you weigh yourself after
intense exercise, during a strict diet or if you are dehydrated.
23.Children under 10 years of age and the elderly may use only the weight measurement
option. The results of measurement options (amount of water, fat or muscle) can be
misleading for people over 70 years of age and people who practice bodybuilding.
24.The device is not intended for pregnant women, people undergoing dialysis, people
with heart pacemakers and other medical implants.
25.If your measurements differ from the norm, consult a physician.
26. The scale will not calculate body fat unless you have bare feet.
27. For an accurate body fat estimate, do not bend your knees, and keep your legs/thighs apart
and straight when standing on the scale.
28. The body fat function is not recommended for use by pregnant women, persons with fever,
swollen legs or other edemas, as well as a person who is over hydrated or dehydrated.
29. Body fat percentages may be slightly higher or lower for children under 16,
or persons with diabetes and other health conditions.
30. Women naturally store approximately 5% more body fat than men.
DESCRIPTION OF THE DEVICE (Fig. 1)
1.1 - Function keys:
a) Up button b) Down Button
1.2 - LCD display 1.3 - Measurement plates
LCD DISPLAY (Fig. 3):
3.1 - user memory code 1-10
3.4 - age
Status indication:
Body weight: 0,1kg/0,2lb
Body Fat:0.1% Body Water:0.1% (Hydration)
Body Bone:0.1% Body Muscle:0.1%
BEFORE FIRST USE
Insert the correct batteries into the compartment (See "Replacing the battery").
WEIGHING
1) Place the scales on a hard and flat surface (avoid carpets and soft surfaces).
2) Gently step on the scale. Stand on the scale evenly distributing your weight and do not move until your weight reading shown on
the display. When the digits flash 3 times, the weight is stabilized and locked.
SETTING MEASUREMENT PARAMETERS
1) Place the scales on a hard and flat surface
2) Press the (c) button. An option to set the user memory number will appear blinking.
3) Use the (a) and (b) buttons to choose a user memory number (10 memories available: P01-P10).
4) Press (c) to confirm your choice.
Repeat steps 3 to 4 to set the gender, age and height. After approximately a few seconds from the last press of the SET button the
scales will switch to the weighing and measuring mode.
Once you have set your profile, press the (c) button and select your profile. Your saved data will briefly flash on the screen of the scale.
To check your saved parameters press the (c) button, set your user memory number and wait until it stops blinking. Then scale will flash
your measurements.
WEIGHING WITH MEASUREMENT
c) On button / SET button
1.4 - Glass platform
3.2 – gender
3.5 - height
4