aqprox appUSB300 Guía Rápida De Instalación página 12

1. Double-click the icon
will appear, you can also run the utility by clicking Start → Program → Wireless →
APPUSB300 Wireless N Client Utility → APPUSB300 Wireless N Client Utility. On the
prompted configuration tab page, click the Profile Management, and you will see the
next screen (Figure 2).
2. Click Scan on the screen above, and you will see a new screen similar to Figure3.
Click Refresh, then the latest available Network will appear.
3. In the screen above, highlight a network name (take test for example) and click
Activate, then you will see the next screen (shown in Figure 4). Enter the Profile
Name, click OK and you can connect to the network.
, then the APPUSB300 Wireless N Client Utility (AWCU)
Figure 2
Figure 3
10