Tabla de contenido
Publicidad
3.10 The PIANYZER, how to make individual piano tunings.
Esta sección es, por desgracia actualmente sólo está disponible en Inglés.
Using the „Pianyzer" (Piano Analyzer) you get more beautiful piano tunings. Here the stretching of
the instrument will be optimized individually.
In the same way as you can store instrument tunings, this stretching is also stored. So you may
save 50 of them.
The stretching can be created in two ways.
1. By an analysis of the piano to be tuned (ANALYZER).
2. By entering cents for certain specific tones (EDITOR).
3.10.1 How to create a stretching by the analysis of a piano (ANALYZER)
If you have practiced, you need for the analysis less than 5 minutes. Due to the interference-free
analog strobe display you get a safe, reproducible result.
By measuring the cent-deviation of certain partials of 5 special tones, reference values are
determined. (See the sample diagram of an individual piano stretching at the end of this chapter).
Based on these support-values, an optimized stretching will be calculated and stored. To this end,
the device makes all settings automatically. Important! For all measurements, please damp with a
felt wedge the string chorus so, that sounds just one string.
To work with the Analyzer, do the following:
After switching on the unit, look for an unused instrument program
i.e. „INSTRUMENT____10". There you search the option
"PIANYZER" using the "note" keys"
After pressing the key "E", keep the die „S" button pressed
while at the same time tapping "F" button, to skip the write
protection.
Select the option „ANALYZER" and press „E" again.
Select the highest tone of your piano which has a 2 string chorus
and press "E".
Select the highest tone of your piano which has a 1 string chorus
and press "E".
Play the note "a-1" to measure the concert pitch of your instrument
and use the "Func" buttons to align the tuner. (See also capter 2.6
of the manual) or you already can tune the chorus of "a-1" to your
desired pitch.
By pressing the "E " you are starting with the measurement of the individual partials of the piano-
analysis. The indicator for this is structured as follows:
Note predetermined
Actual number of meas.
Number of measurement
Progress display
Cents measured
_a_1
1.5:
Y10
2/20 ***
P2
17
TUNE
INSTRUMENT____10
PIANYZER
INSTRUMENT____10
SELECT
ANALYZER <>
_d__
2-STRING CHOIR
_G#_
1-STRING CHOIR
_a_1
440.00
Partial note number
->110
->110
A10
<>
S10
<>
S10
K10
Publicidad
Tabla de contenido
