Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING The high pressure stream of water
that this equipment produces could cut
through skin and its underlying tissues,
resulting in serious injury and possible
amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected, which
could result in serious injury.
• Keep high pressure hose connected to pump and spray
gun while system is pressurized.
• ALWAYS point spray gun in safe direction, press red
button and squeeze spray gun trigger to release high
pressure, every time you stop engine.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places
to store your spray gun, nozzle extension and quick
connect spray tips. There are also hooks at the back of
the accessory tray to wrap your high pressure hose.
1. Place one end of high pressure hose in groove at
top of accessory tray and wrap high pressure hose
around hooks as shown.
2. Place nozzle extension in groove on accessory tray
as shown. Pull rubber strap tight around nozzle
extension and place hole in strap over tab on
accessory tray.
3. Place spray gun in groove on accessory tray as
shown. Pull rubber strap tight around spray gun and
place hole in strap over tab on accessory tray.
4. Insert multi–colored spray tips in holes provided on
front of accessory tray.
How to Use Spray Tips
The quick–connect on the nozzle extension allows you
to switch between three different quick connect spray
tips. Spray tips can be changed while pressure washer
is running once spray gun trigger lock is engaged. The
spray tips vary the spray pattern as shown.
Low Pressure
Black
Use to apply
detergent
Follow these instructions to change spray tips:
1. Pull back collar on quick–connect and pull current
spray tip off. Store spray tips in holes provided on
the accessory tray.
WARNING The high pressure stream of water
that this equipment produces could cut
through skin and its underlying tissues,
resulting in serious injury and possible
amputation.
• NEVER exchange spray tips without the trigger lock
being engaged on the spray gun.
• DO NOT twist spray tips while spraying.
2. Select desired spray tip:
•
For gentle rinse, select green 25° spray tip.
•
To scour surface, select red 0° spray tip.
•
To apply detergent, select black spray tip.
3. Pull back on collar, insert new spray tip and release
collar. Tug on spray tip to make sure it is securely in
place.
Usage Tips
• For most effective cleaning, keep spray tip from
8 to 24 inches (20 to 61 cm) away from cleaning
surface.
• If you get spray tip too close, especially using a high
pressure spray tip, you may damage surface being
cleaned.
• DO NOT get closer than 6 inches (15 cm) when
cleaning tires.
13
High Pressure
25° Green
0° Red
Publicidad
Capítulos
Tabla de contenido
