Craftsman 270 PSI 580.752830 Instrucciones De Uso página 8

5. Attach rope guide (A) through handle with plastic knob
(B). Tighten by hand. Route engine recoil rope through
guide.
A
6. Align hose wrap (C) to the back side of accessory tray.
Locate notch with "unlock" icon (D) on hose wrap.
Position notch at top with hose wrap in vertical position.
Clips in the back of accessory tray should slide into the
grooves on the inside surface of hose wrap. Slide hose
wrap on back of accessory tray and rotate 1/8 turn until
"locked" icon (E) is in vertical position. Hose wrap is
easily removed from the accessory tray for wrapping and
unwrapping of the high pressure hose. A clip to secure
the hose on the reel makes it easy to wrap the hose
while it is detached from the accessory tray.
D
C
7. Attach bottle brackets (F) to handle with carriage bolts
(G) and black plastic knobs (H). Tighten by hand.
F
G
2-IN-1 Soap System
The pressure washer is equipped with two detergent
siphoning hoses.
Project Pro PerfectMix™ Siphon
Blue tube with blue bottle cap:
When using the blue PerfectMix™ siphon, use the
PerfectMix™ Extreme Concentrate straight from
B
the bottle.
Attach Project Pro® PerfectMix™ Siphon to
Pump
Attach the hose end of the blue PerfectMix™ Siphon (J) to
the barbed hose fitting (K) on the pump.
E
Attach PerfectMix™ Detergent Siphon to
Concentrate Bottle
Place PerfectMix™ bottle (not included) in the bottle bracket
on the handle. Remove cap from bottle and insert the
PerfectMix™ Siphon (L). Screw the siphon unit to the top of
the bottle (M). Use the clip on the cap (L) to snap siphon to
bottle bracket when siphon is not in a concentrate bottle.
H
8
Standard Siphon Tube
Clear tube with filter:
When using the clear siphon tube, dilute
1 part PerfectMix™ Extreme Concentrate
to 16 parts water (4 oz of concentrate
makes 1/2 gallon of mix.)
K
J
L
M