DELAYER.
One input, two output delay and early reflections effects in series.
Parameter
Range
DELAY L
0.0-1000.0 ms
Left channel delay time
DELAY R
0.0-1000.0 ms
Right channel delay time
FB. DLY
0.0-1000.0 ms
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN
-99 to +99%
reverse-phase feedback)
HI. RATIO
0.1-1.0
High-frequency feedback ratio
Delay and early reflected delay balance
DLY.BAL
0-100%
(0% = all early reflected delay, 100% = all delay)
HPF
THRU, 21.2 Hz-8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz-16.0 kHz, THRU
Low-pass filter cutoff frequency
S-Hall, L-Hall, Random,
TYPE
Type of early reflection simulation
Revers, Plate, Spring
ROOMSIZE 0.1-20.0
Reflection spacing
LIVENESS
0-10
Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY
0.0-500.0 ms
Initial delay before reverb begins
DIFF.
0-10
Diffusion (spread)
DENSITY
0-100%
Reflection density
ER NUM.
1-19
Number of early reflections
SYNC
OFF/ON
Tempo parameter sync on/off
*1
NOTE L
Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
Used in conjunction with TEMPO to determine right channel DELAY
*1
NOTE FB
Used in conjunction with TEMPO to determine feedback DELAY
*1
*1.
DELAY+REV
One input, two output delay and reverb effects in parallel.
Parameter
Range
DELAY L
0.0-1000.0 ms
Left channel delay time
DELAY R
0.0-1000.0 ms
Right channel delay time
FB. DLY
0.0-1000.0 ms
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN
-99 to +99%
reverse-phase feedback)
DELAY HI
0.1-1.0
High-frequency feedback ratio
Delay and reverb balance
DLY/REV
0-100%
(0% = all delay, 100% = all reverb)
HPF
THRU, 21.2 Hz-8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz-16.0 kHz, THRU
Low-pass filter cutoff frequency
REV TIME
0.3-99.0 s
Reverb time
INI. DLY
0.0-500.0 ms
Initial delay before reverb begins
REV HI
0.1-1.0
High-frequency reverb time ratio
DIFF.
0-10
Diffusion (spread)
DENSITY
0-100%
Reverb density
SYNC
OFF/ON
Tempo parameter sync on/off
Description
(Maximum value depends on the tempo setting)
Description
16
Parameter
Range
*1
NOTE L
Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
Used in conjunction with TEMPO to determine right channel DELAY
*1
NOTE FB
Used in conjunction with TEMPO to determine feedback DELAY
*1
*1.
DELAYREV
One input, two output delay and reverb effects in series.
Parameter
Range
DELAY L
0.0-1000.0 ms
Left channel delay time
DELAY R
0.0-1000.0 ms
Right channel delay time
FB. DLY
0.0-1000.0 ms
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN
-99 to +99%
reverse-phase feedback)
DELAY HI
0.1-1.0
High-frequency feedback ratio
Delay and delayed reverb balance
DLY.BAL
0-100%
(0% = all delayed reverb, 100% = all delay)
HPF
THRU, 21.2 Hz-8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz-16.0 kHz, THRU
Low-pass filter cutoff frequency
REV TIME
0.3-99.0 s
Reverb time
INI. DLY
0.0-500.0 ms
Initial delay before reverb begins
REV HI
0.1-1.0
High-frequency reverb time ratio
DIFF.
0-10
Diffusion (spread)
DENSITY
0-100%
Reverb density
SYNC
OFF/ON
Tempo parameter sync on/off
*1
NOTE L
Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB
*1
Used in conjunction with TEMPO to determine feedback DELAY
*1.
Description
(Maximum value depends on the tempo setting)
Description
(Maximum value depends on the tempo setting)
Data List