Operating Method - Avanti IMC88U3S Manual De Instrucciones

NOTE:
•
If during the ice size adjustment mode the "BIN FULL", "ICE" and "HARVEST" LEDS blink all at
once, this indicates that the unit is in the regular (middle) setting of the ice size.
•
When the machine is in the cleaning stage or ice full stage, the ice size adjustment mode cannot
be accessed

Operating method

1.
Turn on the water tap, let the water trough fill, then press the ON/OFF button on the front panel.
The ice maker will start working automatically.
Ice making stage
2.
After 3 minutes, the machine will automatically go to the ice-making stage, and the sound of water
flowing will be heard.
3. When the batch of ice has been fully formed, ice will automatically be harvested to the ice storage
bin.
4. When the ice storage bin is full, the machine stops making ice automatically.
5. The unit will start making ice again after the ice cubes are removed.
IMPORTANT:
•
Although the unit has been tested and cleaned at the factory, due to long-term transit and
storage, the first batch of cubes must be discarded.
•
Never turn the water supply tap off when the ice maker is working.
•
Never touch the evaporator when unit is running!
•
Except to take ice from the unit, keep the door closed to reduce melting and insure proper ice
formation.
Ice harvest stage
13