Schumacher Electric SP1296 Manual Del Usuario página 11

BATTERY CHARGING TIMES
BATTERY
APPLICATION
POWERSPORTS
AUTOMOTIVE
300 CCA
1000 CCA
MARINE
Times are based on a 50% discharged battery and may
change, depending on age and condition of battery.
AUTOMATIC CHARGING MODE
When an automatic charge is performed, the charger switches to the maintain
mode automatically after the battery is charged.
COMPLETION OF CHARGE
Charge completion is indicated by the CHARGED
pulsing, the charger has switched to the maintain mode of operation.
MAINTAIN MODE (FLOAT MODE MONITORING)
When the CHARGED
mode. In this mode, the charger keeps the battery fully charged by delivering a
small current when necessary. If the charger has to provide its maximum maintain
current for a continuous 12 hour period, it will go into abort mode (see Aborted
Charge section). This is usually caused by a drain on the battery or the battery
could be bad. Make sure there are no loads on the battery. If there are, remove
them. If there are none, have the battery checked or replaced.
MAINTAINING A BATTERY
This unit maintains both 6 and 12 volt batteries, keeping them at full charge. It is not
recommended for industrial applications.
NOTE: The maintain mode technology allows you to safely charge and maintain a
healthy battery for extended periods of time. However, problems with the battery,
electrical problems in the vehicle, improper connections or other unanticipated
conditions could cause excessive current draws. As such, occasionally monitoring
your battery and the charging process is recommended.
CHARGING TIME (Hours)
SIZE
2A 6A
6Ah 6 2
32Ah 15 5
12 4
30 10
50Ah 15 5
105Ah 33 11
(green) LED is pulsing, the charger has started maintain
8A 10A
1.75 1.5
4.5 4
3.5 3
8.5 7
4.25 3.5
9.5 8
• 11 •
(green) LED. When