REPLACE THE BASE GRILLE
Replace the grille by installing the two phillips
headscrew.
SET THE CONTROLS
Set the controls to the recommended setting.
START THE ICE MAKER
Set the ice maker power switch to the I (on) position. The
ice maker will not begin to operate until it reaches its
operating temperature of -9°C (15°F) or below. It will then
begin operation automatically. It will take 2-3 days to fill
the ice bin.
Note: In lower water pressure conditions, the water valve
may turn on up to 3 times to deliver enough water to the
ice maker.
REFRIGERATOR LOCATION
•
Do not install the refrigerator where the temperature
will go below 16°C (60°F) because it will not run often
enough to maintain proper temperatures.
•
Do not install the refrigerator where the temperature
will go above 37°C (100°F) because it will not
perform properly.
•
Install it on a floor strong enough to support it fully
loaded.
DIMENSIONS (mm)
22' CAPACITY***
A*
1733
B
908
C**
786
D
1170
E
1260
F
991
G
1371
H
1054
* The height does not include hinges.
** The depth includes handles.
*** Values can change according to the door style, only
the maximum values are shown.
CLEARANCES
Allow the following clearances for easy installation,
proper air circulation and plumbing and electrical
connections:
SIDES
TOP
BACK
49
23' CAPACITY***
1733
908
738
1158
1243
969
1358
919
22' AND 23' CAPACITY
4 mm
25 mm
13 mm