GE Profile GSMF2LEB Manual De Uso Y Cuidado página 54

Problem
Ice cubes have
odor / taste
Automatic ice maker
does not work
Slow ice cube
freezing
Small or hollow cubes
Ice dispenser does
not work
Water has poor taste / odor
Water in first glass is warm
Possible causes
Ice storage bin needs cleaning
Food transmitting odor / taste
to ice cubes
Interior of refrigerator
needs cleaning
Ice maker power switch
is in the O (off) position
Water supply turned off or
not connected
Freezer compartment
to warm
Piled up cubes in the storage
bin cause the ice maker to
shut off
Ice cubes stuck in ice maker
(green power light on ice maker
blinking)
Door left open
Temperature control not
set cold enough
Water filter clogged
Ice maker turned off or
water supply turned off
An item is blocking or has fallen into
the ice chute
Ice cubes are frozen to ice maker
feeler arm
Irregular ice clumps in
storage ice bin
Dispenser is locked
(LOCK CONTROL)
Water dispenser has not been used
for a long time
Normal when refrigerator
is first installed
Water dispenser has not been
used for a long time
Water system has been drained
54
What to do
Empty and wash bin. Discard
old cubes
Wrap food well
See care and cleaning
Set the power switch
to the I (on)
position
See Installing the water line
Wait 24 hours for the refrigerator
to completely cool down
Level cubes by hand
Turn off the ice maker, remove cubes
and turn the ice maker back on.
Check to see if package is holding
door open
See About the temperature control
Replace filter cartridge with
new cartridge or with plug
Turn on ice maker or
water supply
Remove any item that might be
blocking or has fallen into the ice chute
Remove cubes
Break up with fingertip pressure and
discard remaining clumps
Freezer may be too warm. Adjust
the freezer control to a colder
setting, one position a time until
clumps do not form
Press and hold
LOCK CONTROL
pad for 3 seconds
Dispense water until all water in system
is replenished
Wait 24 hours for the refrigerator
to completely cool down
Dispense water until all water in system
is replenished
Allow several hours for replenished
supply to chill