Premier SX-4659DSD Manual De Instrucciones página 36

System Setup
1.6 LAST MEMORY
ON: During playback or in the paused status each time you open the disc tray or turn off
the player, the unit will memorize the last playback time. Next time when you insert the
same disc and close the disc tray to load the disc, the unit will play from the memorized
point.
OFF: Disable the last memory function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output
via the FL and FR speaker respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and
FR speaker.
NOTE: This function only applies to the AC -3 encoded 5.1-channel discs.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF/OFF: There will be no digital audio signal output. (Coaxial off)
SPDIF/RAW: The digital audio signal output will be in its raw format. Normally, this m ode
is used for Digital 5.1 signals.
SPDIF/PCM: The digital audio signal output will be in PCM format. Normally, this mode is
used for audio CD signals.
2.2.2 LPCM OUTPUT
When DIGITAL OUTPUT is set to SPDIF/PCM, this item is available.
Select a sample rating for the digital audio output. There are two options, 48KHz and
96KHz.
NOTE: Some amplifiers don't support 96KHz sampling which will affect the coaxial output.
2.3 HDCD(High Definition Compatible digital)
HDCD (High Definition Compatible digital) is a patented encode/decode process for
delivering the full richness and details of the sound from HDCD-encoded CDs.
You can set the digital filter to 2x, 1x or off.
2.4 KARAOKE SETUP
2.4.1 MIC SETUP
2.4.1.1 MIC
Set this item to ON/OFF to switch on/off the connected microphone.
2.4.1.2 MIC VOL
Enter this item, then use direction key [ ]/[ ] to adjust the microphone volume. Then
press [ENTER] to confirm you adjustment.
2.4.1.3 ECHO LEVEL
Enter this item, then use direction key [ ]/[ ] to adjust the microphone echo level. Then
press [ENTER] to confirm you adjustment.
Page 10