Ega Master 79789 Manual De Instrucciones página 45

2.8.1 Enabling the Flash
2.8.2 Enabling the Audio Recording Feature
To take a picture move your eye to the view finder and position the camera so that you can see what
it is you would like to take a picture of, the point of interest should be at least 5cm from the lens. The
reticule can be used to frame the image you want to capture. Note that the actual picture is about 15%
larger either side of the actual viewfinder image.
Press and hold the large button (indicated as the "Picture Taking Button" above). The ON LED will
then flash to indicate the picture taking process is active. Keep the camera as still as possible until
the LED has stopped flashing. Once the camera has taken a picture the 3 LEDs will flash in a certain
the red LED will start to flash, after
some seconds the LED will become
Press the "FLASH"
button to enable
the flash feature of
the camera.
Press the "RECORD"
button to enable the
recording feature of
the camera.
Once the flash button is pressed
solid indicating the flash has
charged and is ready for use.
Once the recording feature
is enabled the blue LED will
turn on indicating it is ready
for use.
Picture Taking Button
45