Error Codes - Ega Master 79789 Manual De Instrucciones

Once complete, the camera will power itself off. Simply power it back on as normal (press and hold
the 'flash enable' and 'record enable' buttons together). It will now be running the upgraded software.
2.11

Error Codes

• If the green status LED continually flashed once booted, this means that the batteries are running
low and will soon need replacing.
• If the camera MasterEx intrinsically safe has all 3 LEDs constantly flashing it means that it is in an
unrecoverable state. The only way to get it out of this state is to remove the batteries and then replace
them.
3.1 Intended Purpose Usage
Important
The latest version of the technical documentation or the corresponding technical
Important
The camera MasterEx intrinsically safe is built using modern components and is extremely reliable in
operation; however it must only be used for its intended purpose. Please note that the intended purpose
also includes compliance with the instructions issued by the manufacturer for installation, setting up and
service.
Any other use is regarded as conflicting with the intended purpose. The manufacturer is not liable
for any subsequent damage resulting from such inadmissible use. The user bears the sole risk in such
cases.
3.2 Transportation and Storage
All camera MasterEx intrinsically safe devices must be so transported and stored so that they are not
subjected to any excessive mechanical or environmental stresses.
3.3 Authorized Persons
Only persons trained for the purpose are authorized to handle the camera MasterEx intrinsically
safe; they must be familiar with the unit and must be aware of the regulation and provisions required for
explosion protection as well as the relevant accident prevention regulations.
3.4 Cleaning and Maintenance
The camera MasterEx intrinsically safe and all its components require no maintenance. All work on
the camera MasterEx intrinsically safe by personnel who are not expressly qualified for such activities
will cause the Ex approval and the guarantee to become void.
3.5 Safety Precautions
Important
3. STRUCTURE AND FUNCTION
Before setting the unit to work, read the technical documentation carefully.
supplements is valid in each case.
For the installation, maintenance and cleaning of the units, it is absolutely
necessary to observe the applicable regulations and provisions concerned
with explosion protection (EN 60079-0, EN 60079-14) as well as the Accident
Prevention Regulations.
61