Changing The Adapter (Thin Tube); Inserting And Placing The Hearing Aid - Microson m2 BTE AT Manual De Uso

CHANGING THE ADAPTER (THIN TUBE)
1 2
1. INSERTING THE ADAPTER: Hold the tube firmly and push
the adapter downwards.
2. Make sure that the adapter is completely attached to the
tube.
3. EXTRACTING THE ADAPTER: Hold the tube firmly and pull
the adapter upwards until the two parts become separated.
WARNING!
• Risk of injuries caused by incorrect use of the domes,
adapters or moulds.
• Always use the receiver tube with a dome, adapter or
mould.
• Make sure that the domes/adapters or moulds are
correctly attached to the earpiece tube.
See Accessories and Spare Parts (page 35)
EN
3
26
INSERTING AND PLACING THE HEARING AID
WARNING!
• If the dome/adapter or mould becomes lodged in the
ear, ask a medical professional to remove it.
• Carefully insert the earpiece tube in the ear with the
dome/adapter or mould without inserting it too far.
• Only use the earpiece tube and the dome/adapter or
mould as described in this User Manual.
1. Carefully insert your mould
or adapter into the ear canal.
2. Place the hearing aid behind
the ear.
3. Check that the device is
correctly supported.
27
EN