Pioneer AVH-Z5050TV Manual De Instrucciones página 45

Menu Item Description
[Source Level Adjuster] Adjust the volume level of each source to prevent radical
[-4] to [+4] changes in volume when switching between sources other
than FM.
Touch
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
[Subwoofer] Select enable or disable rear subwoofer output from this
[On] [Off] product.
[Speaker Level] Adjust the speaker output level of the listening position.
1
Listening position*1*2 Touch
[Off] [Front-L] [Front-R] select the output speaker.
2
[Front] [All] Touch
level.
Standard Mode*3
NOTE
[Front Left] [Front Right]
This function is available when [Subwoofer] is set to [On].
[Rear Left] [Rear Right]
[Subwoofer]
Network Mode*3
[High Left] [High Right]
[Mid Left] [Mid Right]
[Subwoofer]
Speaker output level
[-24] to [10]
[Crossover]*4 Select a speaker unit (filter) to adjust the HPF or LPF cut-off
frequency and the slope for each speaker unit (page 47).
[Subwoofer Settings]*4 Select the subwoofer phase (page 47).
[Listening Position]*1 Select a listening position that you want to make as the
[Off] [Front Left] [Front centre of sound effects.
Right] [Front] [All]
or to adjust the source volume after
or to select the listening position then
or to adjust the selected speaker output
Menu Item Description
[Time Alignment] Select or customise the time alignment settings to reflect
[On] [Off] the distance between the listener's position and each
Listening position*1*2
speaker. You need to measure the distance between the
[Off] [Front-L] [Front-R] head of the listener and each speaker unit.
1
[Front] [All] Touch
Standard Mode*3*5 select the alignment speaker.
2
[Front Left] [Front Right] Touch
[Rear Left] [Rear Right] selected speaker and listening position.
[Subwoofer]
TIP
Network Mode*3*5
If you touch [TA On], the time alignment is turned off mandatorily.
[High Left] [High Right]
[Mid Left] [Mid Right]
NOTE
[Subwoofer]
This function is available only when the listening position setting
Distance is set to [Front-L] or [Front-R].
[0] to [350]
[Auto EQ] Set the auto-adjusted equaliser to suit the vehicle's
[On] [Off] acoustics. To use this function, the Auto EQ measurement
must be done in advance (page 46).
[A-EQ&TA Measurement] Measures and adjusts the vehicles acoustics, equaliser, and
time alignment automatically to suit the vehicle interior
(page 46).
[Save Settings] Save to recall the following current sound settings by
touching [OK]: bass boost, slope, subwoofer phase, speaker
level, Graphic EQ, HPF/LPF, listening position, crossover,
time alignment.
TIP
When you touch [Cancel], return to the [Audio] setting screen.
[Load Settings] Load the sound settings.
[Initial Settings] [Sound
NOTES
Setting] [Auto EQ&TA
• [Sound Setting] is available only when you have already saved
Setting]
the sound settings (page 45).
• [Auto EQ&TA Setting] is available only when you have already
performed Auto EQ measurement (page 46).
[Bass Boost]*1 Adjust the bass boost level.
[0] to [6]
[Rear Speaker Output]*1 Select the rear speaker output.
[Rear] [Subwoofer]
NOTE
This function is available when [Standard Mode] is selected as the
speaker mode.
or to select the listening position then
or to input the distance between the
45
En