Sterilization & Easy Cleaning - Omega BMJ330 Manual Del Usuario

STERILIZATION & EASY CLEANING
STEP 1
Follow the disassembling instructions as explained previously in this manual.
STEP 2 Thoroughly wash parts in hot water. No detergent is required, but a mild
detergent may be used if desired. Pulp chute, plunger, and cover require only
light rinsing.
STEP 3 Wash strainer basket/blade assembly and bowl under running water. A stiff brush
may be used to loosen any food residue.
STEP 4
If desired, removable parts may be cleaned in the dishwasher on the top rack.
Do not attempt to clean motor base housing in the dishwasher.
STEP 5 To remove pulp debris from the strainer basket/blade assembly, scrape out using
a non-abrasive brush. Place the strainer basket/blade assembly under running
water to aid in the cleaning process.
STEP 6
Towel dry all parts before reassembling.
STEP 7 After repeated use, mineral stains may begin to appear on parts that come in
contact with juice. Immerse all removable parts and completely submerge in
water overnight with a solution of eight tablespoons of dishwasher detergent per
gallon of water. (Do Not immerse the motor base housing).
STEP 8 If juicing daily, it is recommended to soak parts overnight as mentioned above
on a weekly basis. If this precaution is not taken the openings in the mesh screen
of the basket will start to fill in, making the juicer less efficient.
STEP 9
Your Omega Juicer never needs lubrication of any kind.
DISHWASHER USE: The stainless steel parts of the Mega Mouth Juicer can be placed
in the dishwasher. The plastic parts may be placed in the dishwasher on the top rack
only if the water is not extremely hot. If the water is too hot, the items should be hand
washed. Plastic parts that become warped due to high heat will not be covered under
the warranty.
15