Using Cord Hook; Tool Storage - Panasonic QUICKDRAW MC-V5269 Instrucciones De Operación

Wands (2)
Tubes (2)
Tubos (2)
Dusting Brush
Brosse à épousseter
Cepillo para sacudir
Wand
Tube
Tubo
Raised Tab
Saillie
Lengüeta levantada

Using Cord Hook

Cord Hook
Crochet de
rangement
du cordon
Sujetador
del cordón

Tool Storage

Crevice Tool
Suceur plat
Herramienta
para hendiduras
"J" Slot
Fente en "J"
Ranura en "J"
Hose
Tuyau
Manguera
1)
Detach plug head from power cord.
Rotate cord hook down to release
cord.
2)
Return the cord hook to the upright
position before attempting to rewind
the cord.
Some tools may already be stored on
vacuum cleaner.
Place hose in front of handle on hose
holder.
Attach wand to hose by aligning the
two (2) raised tabs on wand with "J"
slots in hose, guide tabs along
grooves, twist to lock in place.
Place wand in center slot of tool
holder, twisting and pushing down
over short hose to assure a good
connection.
Store other wand with dusting brush
on top, in round front slot of tool
holder.
Place crevice tool into rectangular
rear slot of tool holder.
Refer to PARTS IDENTIFICATION
section for tool location.
- 14 -